Becker S20 MLS - Induction Loop; Slack Rope Switch; Pull-in Safety Device; External Single Push Button

fr
en
de
nl

Induction loop
2
3

Slack rope switch
        12  13  
1213



Caution
The “slack rope switch” input is not monitored to such an extent that
errors can be ruled out. If a combined slack rope/trap switch is used,
this must be connected to the EMERGENCY STOP terminals NA/ES.
Pull-in safety device
        NA/ES    
NA/ES

External single push button
          1  2  




Light barrier
        10  11     
1011 

S20 MLS
