Operating Instructions
31
The TC445, which is supplied ex works with current date and time settings (CET),
operates the receiver in the morning at the pre-programmed switching time and in the
evening at the astro time (sunset).
The TC445 can be operated manually at any time.
With the TC445 up to 5 receivers can be operated individually or together.
This device is characterised by its user-friendly operation.
General information
Use in accordance with regulations
The TC445 may only be used to control roller shutter and sunshade systems.
• Please note that radio sets cannot be operated in areas with increased risk of interfer-
ence (e.g. hospitals, airports).
• The remote control is only permitted for equipment and systems with which a mal-
function in the hand-held transmitter or receiver does not present a risk to persons,
animals or objects, or this risk is covered by other safety devices.
• The operator does not enjoy any protection from disturbances by other remote signal-
ling equipment and terminal equipment (for example, also by radio sets operated in
the same frequency range in accordance with regulations).
• Use radio receivers in conjunction only with devices and systems permitted by the
manufacturer.
Note
Ensure that the controls are not installed and operated in the vicinity of metal
surfaces or magnetic fields.
Radio sets transmitting at the same frequency could interfere with reception.
It should be noted that the range of the radio signal is restricted by legislation and
constructional measures.
To Next Page
Loading...
Need help?
General
