Operating Instructions
48
Changing the battery
• Before installing in the position re-
quired, check that the transmitter and
receiver are functioning properly.
• Fix the mount to the wall with the two
screws provided.
Installing the wall mount
Note
Change the batteries within one
minute, ensuring that you do not press
any buttons during this time.
1. Open the battery compartment door.
2. Take out the batteries.
3. Insert the new batteries in the correct
position.
Clean the device with a damp cloth only.
Do not use a cleansing agent since this
could damage the plastic.
38,5
95
43,6
To Next Page
Loading...
Need help?
General
