Operating Instructions
47
FUNCTION
ROLLER SHUTTER/BLIND, INITIAL OPERATION
(Shutter/blind selection, date of initial operation)
1. Press the MENU button.
2. To select the FUNCTION menu, press the + button until FUNCTION appears.
3. Press OK to confirm. ROLLER SHUTTER/BLIND appears.
4. You can choose between roller shutter/blind using the +/- button.
5. Press OK to confirm. EXPERT MODE OFF/ON appears.
6. The desired setting can be selected using the +/- button.
7. Confirm your selection by pressing OK. INITIAL OPERATION appears.
8. Confirm by pressing OK. FUNCTION appears.
9. Press the MENU button to switch to operating mode
FUNCTION
ROLLER SHUTTER/
BLIND
INITIAL
OPERATION
FUNCTION
EXPERT MODE
OFF/ON
To Next Page
Loading...
Need help?
General
