Mounting and wiring
4.6 DVI-I port
DVI-I port (X200)
The DVI-I interface transfers digital data and is suitable for connecting a digital or analog display. The
resolution at the display or the Beckhoff Control Panel depends on the distance from the display device. The
maximum distance is 5 m. Beckhoff offers various Panels with an integrated “DVI extension”. These make a
cable length of up to 50 meters possible.
DVI-I socket
Pin Assignment Pin Assignment Pin Assignment
1 TMDS Data 2- 9 TMDS Data 1- 17 TMDS Data 0-
2 TMDS Data 2+ 10 TMDS Data 1+ 18 TMDS Data 0+
3 TMDS Data 2/4 Shield 11 TMDS Data 1/3 Shield 19 TMDS Data 0/5 Shield
4 not connected 12 not connected 20 not connected
5 not connected 13 not connected 21 not connected
6 DDC Clock 14 + 5V Power 22 TMDS Clock Shield
7 DDC Data 15 Ground ( +5V, Analog H/
V Sync)
23 TMDS Clock +
8 Analog Vertical Sync 16 Hot Plug Detect 24 TMDA Clock -
Pin assignment (cross)
Pin Assignment
C1 Analog Red Video Out
C2 Analog Green Video Out
C3 Analog Blue Video Out
C4 Analog Horizontal Sync
CX51x038 Version: 1.6
To Next Page
Loading...
