Beckhoff EL34 Series User Manual

Commissioning
EL34xx126 Version: 1.5
Standard setting
The advanced settings of the EtherCAT Master are set as standard:
• EtherCAT Master: OP
• Slaves: OP
This setting applies equally to all Slaves.
Fig.141: Default behaviour of the System Manager
In addition, the target state of any particular Slave can be set in the "Advanced Settings" dialogue; the
standard setting is again OP.
Fig.142: Default target state in the Slave

Beckhoff EL34 Series Specifications

General

Brand	Beckhoff
Model	EL34 Series
Category	Touch terminals
Language	English