Beckhoff EP1 Series - Documentation Issue Status

Foreword
EP1xxx 7Version: 2.5.0
1.3 Documentation issue status
Version Modifications
2.5.0 • EP1816-3008 added
2.4.1 • EP1111-0000 – technical data updated
2.4.0 • Nut torques for connectors updated
2.3.0 • Torque wrench diagram updated
• Power connection updated
2.2.0 • EP1008-0022 added
• EP1819-0021 added
• Cabling adjusted
2.1.0 • Nut torques for connectors extended
2.0.0 • Migration
• Technical data updated
1.4.0 • Accessories chapter added
• Chapter on Nut torques for connectors updated
• Chapter on EtherCAT connection updated
• Chapter on BG2000-0000 - protective housing for EtherCAT Box updated
1.3.0 • EP1111-0000 added
• EP1098-0001 and EP1098-0002 added
• EP1809-0021, EP1809-0022 and EP1819-0022 updated
1.2.0 • ATEX notes added
• Extended temperature range for activated modules documented
• EP1809-0021, EP1809-0022 and EP1819-0022 added
• Description of the power connection updated
• Overview of EtherCAT cables extended
1.1.0 • Technical data: Current consumption values amended
• Nut torques for connectors added
1.0.0 • Process data description extended
0.7 • Description of status LEDs added
• Signal connection extended
• Explanation of the serial number adapted to the new standard
0.6 • Signal connection extended
0.5 • First preliminary version
Firmware and hardware versions
This documentation refers to the firmware and hardware version that was applicable at the time the
documentation was written.
The module features are continuously improved and developed further. Modules having earlier production
statuses cannot have the same properties as modules with the latest status. However, existing properties
are retained and are not changed, so that older modules can always be replaced with new ones.
The firmware and hardware version (delivery state) can be found in the batch number (D-number) printed on
the side of the EtherCATBox.
Syntax of the batch number (D-number):
D: WW YY FF HH