Need help?Do you have a question about the Beckman Coulter Optima L-100K and is the answer not in the manual?
General| Type | Ultracentrifuge |
|---|---|
| Maximum Speed | 100, 000 RPM |
| Maximum RCF | 802, 000 x g |
| Control System | Microprocessor-controlled |
| Drive System | Direct drive |
| Rotor Types | Fixed-angle, swinging bucket |
| Control Panel | Digital display, keypad |
| Programs | Multiple programmable protocols |
| Power Requirements | 200-240 V, 50/60 Hz |
| Temperature Range | 0°C to 40°C |
Details safety precautions for installation and maintenance procedures.
Focuses on reducing the risk of electrical shock.
Discusses fuse protection and fire risk prevention.
Details speed, time, temperature, and w²t parameters.
Identifies keys and displays on the front control panel.
Describes red LEDs that alert to conditions needing attention.
Explains the safety feature preventing overspeed conditions.
Describes the system that monitors rotor energy for safety.
Step-by-step guide for performing a standard run.
Procedures for running pre-programmed sequences.
How to execute a run with a programmed delay.
Detailed steps for performing zonal centrifugation.
Actions to take if power is lost during operation.
Procedures for sample retrieval after a power failure.
Warning about not operating the instrument without the front panel.
Explains how diagnostic messages are displayed and interpreted.
Instructions for cleaning instrument surfaces.
Procedures for decontaminating radioactive or pathogenic materials.
Guidelines for sterilizing and disinfecting instrument surfaces.
To Next Page
