BECSY UC200 - IR Learning Functionality; Introduction to IR Learning Functionality; Preparing for IR Signal Learning

26
11. IR Learning
▪ If the BECSY multi-remote control itself has unregistered functions
or if you want to register a remote control that is not in the
database, you can use the IR learning function to control data can
be registered.
3) Select Learning.
<existing remote to cop>
1) For IR learning, first place the IR transmitter of the existing
remote control and the IR receiver of the BECSY remote control
facing each other at a distance of 2 to 4 cm, then proceed to
the next step.
2) Press and hold the UC500 setup key or the UC200
home screen key for 3 seconds to move to the setup mode.