BECSY UC200 - Completing IR Signal Learning; Capturing and Confirming IR Signals; Repeating IR Learning if Unsuccessful

IR Learning
[2/5]
Press any key to learn
28
SUCCESS
7) When you press the key you want to learn from the existing
remote control, it automatically receives and stores the signal
at the specified key on the UC500. When IR learning is completed
normally, the phrase 'SUCCESS' appears at the bottom of the screen.
< Press the key to copy >
8) In the same way, the rest of the keys do IR learning.
※ If it is not completed at once, repeat the learning.
▪ You can refer to the IR learning method video by accessing the
QR Code below.
11. IR Learning