EasyManua.ls Logo

Beem Classico - Preparation Steps; Preparing Espresso and Double Espresso

Beem Classico
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 34
Preparation
NOTES
Do not operate the device without water. If this does happen, the device issues an
error message (several beeps in succession) (see the “Troubleshooting” chapter).
Never use the device without a suitable container below the coffee outlet and
the milk nozzle.
The device remains in operation and the control panel is lit up for up to 30 minutes
af
ter the last action. During this time, the water in the water tank (2) and the cup
warmer (15) are heated. Once 30 minutes have elapsed, the device needs to be
switched on again using the button
(16) to prepare another speciality coffee.
If the brewing process is to be aborted prematurely, press the chosen button
again. You will hear a beep, and the control panel is fully lit up again. The device is
in stand-by mode.
Espresso / Double Espresso
The perfect amount of espresso to suit your own taste can be programmed in the
device (see the “Handling and Operation” chapter | “Programming Quantities”)
1. Fill the water tank (1) (see the “Handling and Operation” chapter | “Filling the Water
Tank).
2. Insert the lter you want
into the porta lter (12) (see the “Handling and Operation”
chapter | “Inserting / Removing the Filter in the Porta lter”).
3. Fill the lter
with coffee powder (see the “Handling and Operation” chapter | “Filling
the Filter With Coffee Powder”).
4. Insert the
porta lter into the device (see the “Handling and Operation” chapter |
“Inserting / Removing the Porta lter”).
5. Press the button
(16) to switch on the device and preheat the water. The control
panel ashes during the heating process.
If the milk tank is not inserted, only the
button (24) for an espresso or the button
(17) for two espressos
can be selected. Accordingly, the control panel is also
only lit for these buttons.
6. Place one or two suitable cup(s) under the coffee outlet (14).
For small cups, the device has a fold-down deposit surface (13) on the housing.
Simply ip this down (Picture F).
7. As soon as the device has heated up, the control panel stops ashing. Press the
button for an espresso or the button for two espressos or a double espresso.
03428_DE-EN-FR-NL_A5_V3.indb 3403428_DE-EN-FR-NL_A5_V3.indb 34 12.01.2018 11:24:4412.01.2018 11:24:44

Related product manuals