EasyManua.ls Logo

Beem Classico - Self-Cleaning Functions; Quick Clean of Milk Tank System; Intensive Clean of Portafilter and Milk Tank System

Beem Classico
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37 EN
Self-Cleaning
Quick Clean of the Milk Tank System
The quick clean of the milk tank system should be carried out after every use so that no
milk residues can remain in the system and dry on or go mouldy.
1. Fill the milk tank with water (see the “Handling and Operation” chapter | “Filling the Milk
Tank).
2. Fold out the milk nozzle (8) using the lever (7) (Picture E).
3. Press the button
(16) to switch on the device and preheat the water. The control
panel ashes during the heating process.
4. Place a suitable cup below the milk nozzle.
5. As soon as the device has heated up, the control panel stops ashing. Press the
button
(20). A beep sounds, the self-cleaning starts and the button ashes.
6. Run the programme and pour away the contents of the cup after the self-cleaning
nishes.
7. Repeat this process if necessary.
Intensive Clean of the Porta
lter and Milk Tank System
During the intensive clean, the porta lter is also thoroughly rinsed through in addition to
the milk tank system. This allows coffee residues which are stuck on to be rinsed out of
the porta lter and the lters if applicable.
1. Fill the water tank (2) with water (see the “Handling and Operation” chapter | “Filling the
Water Tank”).
2. Also ll the milk tank with water (see the “Handling and Operation” chapter | “Filling the
Milk Tank”).
3. Fold out the milk nozzle (8) using the lever (7) (Picture E).
4. Press the button
(16) to switch on the device and preheat the water. The control
panel ashes during the heating process.
5. Place a suitable cup below the coffee outlet (14) and the milk nozzle.
6. As soon as the device has heated up, the control panel stops ashing. Press the
button
(20) for approx. 5 seconds. A beep sounds, the self-cleaning starts and
the button
ashes.
7. If you want to stop the cleaning, press the button
again. The device switches to
stand-by mode.
8. Pour away the water in the cup.
9. Repeat this process if necessary.
03428_DE-EN-FR-NL_A5_V3.indb 3703428_DE-EN-FR-NL_A5_V3.indb 37 12.01.2018 11:24:4512.01.2018 11:24:45

Related product manuals