UK UK
14 15
CORRECT SECURING OF YOUR BABY
To ensure your baby’s safety, check that:
• Shoulder belts t the baby’s body closely without constricting the baby and the belt
is not twisted.
• The position of the headrest is correctly adjusted.
• The height of the harness straps for rear-facing use is aligned with the child‘s
shoulders or just below.
• Belt tongues are locked in place in belt buckle.
CORRECT INSTALLATION OF THE INFANT CAR SEAT
NOTE! This infant car seat is exclusively made for forward facing seats of vehicles,
which are equipped with ISOFIX according to UN R16.
To ensure your baby’s safety, check that:
• The infant car seat is secured with the child facing the rear of the vehicle.
• If the infant car seat is used in the passenger seat, the airbag must be deactivated.
USED AS TRAVEL SYSTEM
NOTE! Please check and follow the instruction manual for your stroller before using the
car seat as a travel system.
• You may attach the infant car seat on any approved stroller.
• This infant car seat is suitable for maxi-cosi adapters.
REMOVING THE COVER
The cover consists of 6 parts:
• 1 backrest cover.
• 1 newborn inlay.
• 1 headrest cover.
• 1 belt buckle pad.
• 2 shoulder pads.
To remove the cover, please apply the following procedure:
1. Undo the belt buckle.
2. Remove both shoulder pads from the belt.
WARNING!
The infant car seat must under no circumstances be used without the cover.
NOTE!
Only original covers may be used.
To Next Page
Loading...