17 Credits
Oneiroi is a collaboration between three forces of nature; Roberto Noris, Rebel Technology, and
Befaco.
The Black Magic of Roberto Noris as a programmer and concept designer running on the
Rebel’s OWL3 Platform and dragged to reality by the reckless Befaco Team… What could go
wrong?
Thanks to all the people who made it possible!!
Made with love in Barcelona.
18 ONEIROI Cheat Sheet
● SAVE PARMETERS TO FLASH: Hold the MOD AMT Button until it blinks.
● CLEAR MODULATION MAPPING: While in modulation mapping mode, press the
RECORD + RANDOM buttons at the same time
● CLEAR CV MAPPING: While in CV mapping mode (green light), press the RECORD +
RANDOM buttons at the same time
● CLEAR BUFFER: SHIFT + RECORD At the same time.
● RANDOM UNDO/REDO: SHIFT + RANDOM At the same time = UNDO randomization. Do
it again for REDO
● MANUAL MODE (ALL PARAMETERS TO KNOB POSITIONS): Hold the SHIFT button and
press both the RECORD + RANDOM buttons at the same time.
● STARTUP SETTINGS: RECORD + RANDOM buttons while turning on the module:
○ SHIFT button toggles Knob behavior: ON = Catch Mode, OFF = Jump Mode.
To Next Page
Loading...