Befaco ONEIROI - Appendix 1; Updating the Patch (Via Browser); Calibration Procedure

○ RECORD button toggle Modulation Amount range: ON= attenuver ter, OFF=
attenuator.
○ RANDOM button toggle Modulation Amount range ON= attenuver ter, OFF=
attenuator.
Appendix 1
Updating The patch (via browser)
1. Find the latest patch from the release page:
https://github.com/Befaco/Oneiroi/releases
2. Click on "Downloads" and download the file named "patch.syx"
3. Open a Web-MIDI-enabled browser. We recommend using Chrome or Chromium. Other
Browsers would maybe work but it has not been tested.
4. Connect Oneiroi to your computer using any of the USBs on the back side.
On your browser, go to the OpenWare Laboratory:
https://pingdynasty.github.io/OwlWebControl/extended.html
5. Check if Oneiroi is connected to the page: The page should say: "Connected to Oneiroi
vx.x.x"
6. Click "Choose file" and upload the patch.syx from your computer
7. Push "Store". A popup will appear, asking for the slot. Accept to store on slot 1.
Done!
Appendix 2
Calibration Procedure
It calibrates the V/OCT CV IN tracking, the range of all manual controls, and the center position
of the PITCH and VARISPEED knobs.
Updating the patch does not erase the calibration data, so no need to perform a calibration after
the patch update.