18
86105 BA-en/00
English ⋅ Nautilus
®
CC plus ⋅ Nautilus
®
T
Switching the device on
Risk of injury
Wear suitable protective equipment
when operating the device!
Only touch the touchscreen with the
fingertips! Do not use pens or finger-
nails!
Any liquid leaking from the screen as
a result of damage is toxic and
corrosive! Avoid contact with skin,
swallowing or inhaling it!
1. Open compressed air supply.
2. Switch the device on.
The device initializes the measurement sys-
tem. After 2 - 3 minutes (cold device) the
device is ready for operation.
3. Wait until the main menu appears on the
screen.
When the device is turned on for the very first
time, the device activation screen will appear
instead (see page 19).
4. Select the desired task by pressing on it.
To Next Page
Loading...
Need help?
General
