70
86105 BA-en/00
English ⋅ Nautilus
®
CC plus ⋅ Nautilus
®
T
Service and Maintenance
Service
If necessary, clean the device on the outside with a
dry or slightly damp cloth.
Check the casting chamber daily for contamination
(casting pearls) and if necessary clean with cloth or
vacuum cleaner.
Do not use abrasive cleaning agents as they may
damage the coating of the induction coil (see illus-
tration). The coating reliably prevents short-circuits
in case of any contamination between the coil
windings (casting pearls).
The coating can wear off through regular use. This
is unavoidable and does not constitute any reason
for complaints. The operation of the device is
guaranteed regardless of the condition of the
coating.
Warning of electric shock! Danger
to life!
Switch the device off and disconnect it
from the power supply before carrying
out any service or maintenance work!
(for power connection without mains
plug: remove fuses, secure the
devices against restart and make sure
that it is not live)
Burn hazard from hot parts!
Carry out maintenance and cleaning
work before casting or after the device
has cooled down.
To Next Page
Loading...
Need help?
General
