Bego Nautilus T User Manual

2
86105 BA-en/00
English ⋅ Nautilus
®
CC plus ⋅ Nautilus
®
T
en
This device documentation is part of the device
and must be enclosed when selling or trans-
ferring the device.
• The device has been designed solely for use in
dental laboratories and comparable institutions
for research, commercial and training purpos-
es. The device must only be operated by dental
professionals; trainees and other persons oper-
ating the device must be supervised..
• The operating instructions must be read and
understood before the device is used. This
applies, in particular, to Safety Instructions.
Damage caused by non-compliance with these
operating instructions will invalidate any and all
warranty claims. We will also not accept liability
for any resulting consequential damage.
Table of contents
General Information............................................... 4
Important notes ..................................................... 6
Unpacking / Packing.............................................. 7
Safety instructions................................................. 8
Device description................................................11
Scope of delivery and extras............................... 13
Technical data ..................................................... 15
Installation ........................................................... 16
Switching the device on....................................... 18
Initial commissioning ........................................... 19
Basic principles: Wax-up..................................... 23
Basic principles: Crucible .................................... 25
Basic principles: Moulds...................................... 27
Basic principles: Work......................................... 28
Program table (BEGO alloys).............................. 34
Table of holding times / further heating times...... 35
Settings ............................................................... 36
NAUTILUS
®
CC plus
Device description........................................... 44
Casting process settings ................................. 45
Casting ............................................................ 48
NAUTILUS
®
T
Device description........................................... 60
Casting process settings ................................. 61
Casting ............................................................ 63
Service and Maintenance.................................... 70
Troubleshooting................................................... 79
Signs, labels and stickers.................................... 82
Disposal............................................................... 84
Declaration of Conformity......................... Appendix

Bego Nautilus T Specifications

General

Brand	Bego
Model	Nautilus T
Category	Dental equipment
Language	English