48
86105 BA-en/00
English ⋅ Nautilus
®
CC plus
Casting
Automatic casting
1. Select the alloy (see page 41).
2. Go to Settings > Program > Automatic casting.
3. Optional: Enter log data (see "Setting up the
protocol" on page 40). This data appears in the
casting protocol that is stored on the con-
nected USB flash drive.
• Enter work number, batch and casting quan-
tity and confirm the entry with "OK" or
• Skip the data entry with "Abort".
4. Insert the alloy.
5. Close the crucible door.
6. Confirm the preheating process with "OK".
For some alloys, the preheating process may
be skipped with a second button.
Risk of injury
Wear suitable protective equipment
when operating the device!
Only touch the touchscreen with the
fingertips! Do not use pens or finger-
nails!
Any liquid that leaks as a result of
damage is toxic and corrosive! Avoid
contact with skin, swallowing or
inhaling in!
To Next Page
Loading...
Need help?
General
