Bego Nautilus T - Page 40

40
86105 BA-en/00
English ⋅ Nautilus
®
CC plus ⋅ Nautilus
®
T
en
Program
The casting program settings for models
NAUTILUS® CC plus and NAUTILUS® T differ. The
respective settings are specified in the model-
specific paragraphs:
•NAUTILUS
®
CC plus see page 45,
•NAUTILUS
®
T see page 61.
Language: Pressing a button will change the
device to the corresponding language. The
following languages are available:
• English
• English
• Italian
• Spanish
•French
• Russian
Setting up the protocol: This menu is used to
maintain the necessary laboratory and address
data for protocol content.
The "Protocol" button activates (orange) or deacti-
vates (gray) logging. If logging is activated, an input
mask will open before casting where the alloy
batch, order number and cast quantity (see
paragraph "Casting" in model-specific chapters)
can be entered.