Bego Nautilus T User Manual

English ⋅ Nautilus
®
CC plus ⋅ Nautilus
®
T
41
86105 BA-en/00
en
Alloy selection
In order to cast an alloy, the corresponding casting
program needs to be selected. Every program
contains additional heating times, holding times,
vacuum volume, pressure, etc.
The programs for all BEGO alloys are stored in the
device. Additional alloy programs can be set up and
stored for non-BEGO alloys.
1. Press the button with the preselected alloy in
the main menu.
The alloy selection menu will be called up.
2. Pressing the "Back" switches back to the main
menu without making a selection.
3. The selection can be limited as follows:
• The "All alloys" button switches between
non-precious metal, precious metal, other
alloys, all alloys and favourites. The list of
favourites is generated automatically
based on the used alloys. If more than 15
different alloys have been used, the alloy
that had been entered first, will be deleted
so that the newly selected alloy can be add-
ed to the table (ring buffer).
• The buttons "+" more and "-" less are used
to navigate to additional pages, provided
that there are more than 15 alloys.
• The list can be sorted by program number
(0-9) or by program name (A-Z).
4. Select the desired alloy.
The main menu will be called up with the
selected alloy.

Bego Nautilus T Specifications

General

Brand	Bego
Model	Nautilus T
Category	Dental equipment
Language	English