Removal of spilled resin
If the glass pane should brake outside the device,
causing resin to escape, proceed as follows:
1. Avoid light sources,
2. Wear protective clothing (safety goggles, pro-
tective gloves and lab coat).
3. Wipe-up the resin using paper towels and
4. clean the soiled areas with the help of ethanol
and towels. The cloths that have taken up the
liquid resin should be disposed of according to
the rules for hazardous waste.
Should the VARSEO S cartridge leak and resin
spills into the device, proceed as follows:
1. Unplug the power cord,
2. do not operate the equipment and
3. inform the service.
Risk of injury
Risk of slipping
Any resin spilt on the floor must be
wiped up using ethanol and paper
towels to avoid slip hazard.
To Next Page
Loading...
Need help?
General
