Behringer DIGITAL REVERB DR600 - Manual

DIGITAL REVERB DR600
Digital Stereo Reverb Eects Pedal
Thank you for showing your condence in us by purchasing the Behringer
DIGITAL REVERB DR600. This ultimate eects pedal is specically designed
to deliver 24-bit high-resolution stereo reverbs comparable to state-of-
the-art studio processors. Thanks to six renowned modes and extensive
parameter control for maximum creativity you’ll have plenty of cool
sounds at your disposal for every situation.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The TONE controlallows you to shape your overall sound.
(3) The TIME control determines the rever time.
(4) The MODE control lets you chose between six dierent
reverbsounds:
SPRING: Simulates classic spring reverberation.
PLATE: Simulates the sound of plat reverberation.
HALL: Very bright reverb that simulates the reections of a
concert hall.
GATE: This eect snthetically cuts o reverberation after a period
of time.
ROOM: Clearly hear natural room acoustics.
MODULATE: By detuning the reverb tail it creates spacious,
almost choir-like reverb that reminds a little bit of a chorus eect.
(5) The ON/BATT LED illuminates when the eect is activated. It also
serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use the two ¼" TS connectors IN A and IN B to plug in a stereo
input signal. For mono use just plug in IN A.
V1.0
(1)
(2)
(4)
(5)
(6)
(3)
(8) (7)