Using a Behringer FCB1010 with a Korg Pa2X
Open the MIDI IN CHANNEL Tab
Very important!!!
Set MIDI Channel 16 = CONTROL
Nothing will work unless you set this Control Channel.
The Behringer FCB1010 will transmit the Program Change values on MIDI CHANNEL 16.
This will control the Style Elements.
Set MIDI Channel 01 = GLOBAL
Note: The Expression Pedals A and B on the FCB1010 device will communicate via GLOBAL
CHANNEL 01.
Your Roland RD-700GX 88-key controller will also communicate with the Korg Pa2X via this
GLOBAL CHANNEL.
To Next Page
Loading...
