Behringer NX3000 - Specifications; System Specs and Power for Additional Models

Quick Start Guide 41
ЛУ1
NX3000 NX1000D NX1000
 System
Inputs
2 x combo jacks
Input impedance
10 kO unbalanced, 20 kO balanced
Outputs 2 x locking-style professional speaker connectors
Output circuit type
Class D
Distortion
<0.05%
<0.1%
<0.05%
Frequency response
20 Hz to 20 kHz, +0/-1 dB
Damping factor
>145 @80
>155@8Q
Signal-to-noise
>100 dB
USB
—
Rear panel USB connector type  for
remote control of DSP section
—
 Circuit Protection
Cooling
Continuously variable speed fan
Back-to-front air flow
Amplifier protection
Thermal and DC protection Stable into reactive or mismatched loads
Load protection
On/off muting, DC-fault power supply shutdown
 Power Supply, Voltage, Current Consumption (Breaker / Fuses)
USA/Canada/Japan
100-120 V~, 50/60 Hz, (T 10 A H 250 V)
100-120 V~, 50/60 Hz, (T 6.3 A H 250 V)
UK/Australia/Europe
220-240 V~, 50/60 Hz, (T 6.3 A H 250 V)
220-240 V~, 50/60 Hz, (T 3.15 A H 250 V)
Korea / China 220-240 V~, 50/60 Hz, (T 6.3 A H 250 V)
220-240 V~, 50/60 Hz, (T 3.15 A H 250 V)
Power consumption @20,
1 /e rated power
350 W
150 W
Mains connector
Standard IEC receptacle
 Dimensions/Weight
Dimensions (H*xWxD)
94x483x231 mm (3.7x19.0x9.1")
Weight 3.5 kg (7.7 lbs)
3.4 kg (7.5 lbs) 3.3 kg (7.3 lbs)
* including 5mm rubber feet