EasyManua.ls Logo

Behringer WASP DELUXE - Specifications; Important Information; Register Online; Malfunction

Behringer WASP DELUXE
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Envelopes VCA, VCF
Connectivity
MIDI in / thru 5-pin DIN / 16 channels
USB (MIDI) USB 2.0, type B
Main out (high) 1 x ¼” TS, unbalanced, max. 0 dBu
High output impedance 1.3 k Ω
Main out (low) 1 x ¼” TS, unbalanced, 27 dB below high output
Low output impedance 1 kΩ
Main Audio out 3.5 mm TRS, unbalanced, max. 0 dBu
Phones 3.5 mm TRS, unbalanced, max. -2 dBu @ 32 Ω
Phones output impedance 25 Ω
USB
Type Class-compliant USB 2.0, type B
Supported operating systems
Windows XP or higher
Mac OS X 10.6.8 or higher
Power Requirements
External power adapter 12 V DC 1000 mA
Power consumption 2 W
Environmental
Operating temperature range 5°C – 40°C (41°F – 104°F)
Physical
Dimensions (H x W x D) 87 x 374 x 136 mm (3.4 x 14.7 x 5.4″)
Module width 70 HP
Weight 1.6 kg (3.5 lbs)
Shipping weight 2.5 kg (5.5 lbs)
Other important information
Important information
1. Register online.
Please register your new Music Tribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to
process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your
Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at
behringer.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at
behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.
3. Power Connections.
Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses
of the same type and rating without exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address:5270 Procyon Street Las Vegas, NV 89118 USA
Phone Number: +1 702 800 8290
WASP DELUXE
complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
We Hear You
File Downloads

Other manuals for Behringer WASP DELUXE

Related product manuals