Behringer X32 Core User Manual

Quick Start Guide 3938 X32 CORE DIGITAL RACK MIXER
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Responsible Party Name: MUSIC Group Services US Inc.
Address: 18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone/Fax No.: Phone: +1 425 672 0816
Fax: +1 425 673 7647
X32 CORE DIGITAL RACK MIXER
complies with the FCC rules as mentioned in the followingparagraph:
This equipment has been tested and found to comply with the limits for a ClassB
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the followingmeasures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician forhelp
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Important information:
Changes or modications to the equipment not expressly approved by MUSIC Group
can void the user’s authority to use the equipment.
X32 CORE DIGITAL RACK MIXER
1. Online registrieren. Bitte registrieren Sie Ihr
neues MUSIC Group-Gerät direkt nach dem Kauf auf der
Website behringer. com. Wenn Sie Ihren Kauf mit unserem
einfachen online Formular registrieren, können wir Ihre
Reparaturansprüche schneller und ezienter bearbeiten.
Lesen Sie bitte auch unsere Garantiebedingungen,
fallszutreend.
2. Funktionsfehler. Sollte sich kein MUSICGroup
Händler in Ihrer Nähe benden, können Sie den
MUSICGroup Vertrieb Ihres Landes kontaktieren,
derauf behringer. com unter „Support“ aufgeführt ist.
Sollte Ihr Land nicht aufgelistet sein, prüfen Sie bitte,
ob Ihr Problem von unserem „Online Support“ gelöst
werden kann, den Sie ebenfalls auf behringer. com unter
„Support“ nden. Alternativ reichen Sie bitte Ihren
Garantieanspruch online auf behringer. com ein, BEVOR Sie
das Produktzurücksenden.
3. Stromanschluss. Bevor Sie das Gerät an
eine Netzsteckdose anschließen, prüfen Sie bitte, obSie
die korrekte Netzspannung für Ihr spezielles Modell
verwenden. Fehlerhafte Sicherungen müssen ausnahmslos
durch Sicherungen des gleichen Typs und Nennwerts
ersetztwerden.
4. AES50. Um allen lokalen Gesetzen zu genügen,
einschließlich (aber nicht nur) der EU EMV Direktive
2004/108/EC der EU Mitgliedsstaaten, sowie der FCC Teil
15 für die Vereinigten Staaten von Amerika, müssen alle
Verbindungen an den Ultranet-, Ethernet- und AES50 Port
A und B Anschlüssen des Behringer X32 mit abgeschirmten
CAT5/5e oder CAT6 Kabeln ausgeführt werden.
1. Registre-se online. Por favor, registre seu
novo equipamento MUSIC Group logo após a compra
visitando o site behringer. com Registrar sua compra
usando nosso simples formulário online nos ajuda a
processar seus pedidos de reparos com maior rapidez e
eciência. Além disso, leia nossos termos e condições de
garantia, caso seja necessário.
2. Funcionamento Defeituoso.
Casoseufornecedor MUSIC Group não esteja localizado
nas proximidades, você pode contatar um distribuidor
MUSIC Group para o seu país listado abaixo de “Suporte”
embehringer. com. Se seu país não estiver na lista,
favorchecar se seu problema pode ser resolvido com o
nosso “Suporte Online” que também pode ser achado
abaixo de “Suporte”em behringer. com. Alternativamente,
favor enviar uma solicitação de garantia online em
behringer. com ANTES da devolução do produto.
3. Ligações. Antes de ligar a unidade à tomada,
assegure-se de que está a utilizar a voltagem correcta para
o modelo em questão. Os fusíveis com defeito terão de
ser substituídos, sem qualquer excepção, por fusíveis do
mesmo tipo e corrente nominal.
4. AES50 Para estar em pleno acordo com as
legislação nacional incluindo (mas não limitado a)
transposição da Diretiva DC EMC 2004/108/EC pelos
estados membros da UE e parte 15 da FCC para os Estados
Unidos da América, todas as conexões feitas com as
portas A e B Ultranet, Ethernet e AES50 no console X32
da Behringer devem ser feitas com a utilização de cabos
CAT5/5e ou CAT6 blindados.
Weitere wichtige
Informationen
Outras Informações
Importantes

Behringer X32 Core Specifications

Power

input voltage	100-240 V (50/60 Hz)
power consumption	120 W
phantom power	48 V

Audio Specifications

total harmonic distortion + noise	< 0.006% A-weighted
equivalent input noise level	-128 dBu
dynamic range (analog in to analog out)	106 dB

Input/Output Characteristics

input impedance XLR	5 kΩ / 10 kΩ unbalanced / balanced
output impedance XLR	75 Ω / 75 Ω unbalanced / balanced
non clip maximum input level XLR	+23 dBu

Weight and Dimensions

dimensions	19 x 12 x 17.24 inches, 483 x 307 x 438 mm
weight	7.9 lbs / 3.6 kg