Need help?Do you have a question about the Behringer XENYX UFX1204 and is the answer not in the manual?
General| Type | Analog Mixer with USB Interface |
|---|---|
| Channels | 12 |
| Microphone Preamps | 4 |
| Phantom Power | Yes |
| Headphone Output | 1 |
| Inputs - Line | 8 |
| Faders | 60mm |
| EQ per Channel | 3-band |
| USB Interface | Yes |
| Tape Input/Output | RCA |
| Effects | Built-in effects processor |
| Outputs - Other | Aux Send |
| A/D Resolution | 24-bit |
| Weight | 4.2 kg |
General safety precautions and warnings for electrical equipment.
Legal disclaimer and limited warranty terms for the product.
Connecting audio sources and equipment to the mixer.
Connecting audio sources and equipment to the mixer.
Description of controls on the front panel of the mixer.
Description of controls and connectors located on the rear panel.
Detailed explanation of controls for each mixer channel.
Explanation of controls in the main mixer section.
Initial setup steps for connecting and powering on the mixer.
Adjusting overall output and using AUX sends for live performance.
How to set input gain levels correctly for microphones and instruments.
Guide to using the mixer's built-in multi-effects processor.
Connecting the mixer for audio recording via FireWire or USB.
Recording audio directly to a USB drive without a computer.
Operating the USB drive recorder and using MIDI control features.
Technical specifications for all input and output connections.
Technical specs for effects, FireWire/USB interface, and USB recorder.
General product information, registration, power, and FCC compliance details.
To Next Page
