Need help?Do you have a question about the Behringer Xenyx UFX1604 and is the answer not in the manual?
General| Type | Analog Mixer with USB Interface |
|---|---|
| Channels | 16 |
| Phantom Power | Yes |
| Aux Sends | 4 |
| USB | Yes |
| Computer Connectivity | USB 2.0 |
| Headphone Output | 1 |
| Control Room Outputs | 1 |
| Microphone Preamps | 8 |
| Outputs - Main | 2 |
| Outputs - Other | 4 (Aux) |
| EQ Bands | 3-band |
| Faders | 60mm |
| Tape Inputs/Outputs | 1 In/1 Out |
| Weight | 11.68 lbs |
Covers warnings about electric shock, high voltage, and service by qualified personnel.
Details precautions against water, heat, ventilation, and proper usage of power cords and plugs.
Provides legal disclaimers regarding liability and details on the limited warranty terms.
Illustrates connecting microphones, guitars, and basses to the mixer's front panel inputs.
Shows hook-up for keyboards and audio monitors via front panel connections.
Diagrams rear panel connections for devices like noise gates, stage monitors, and effects units.
Diagrams the primary controls on the mixer's front panel, including inputs and EQ.
Details controls for monitoring, effects sends, and returns on the mixer's front panel.
Illustrates the various input, output, and connection ports located on the mixer's rear panel.
Explains controls for channel inputs, gain, EQ, compression, and signal routing.
Describes controls for auxiliary sends, effects selection, editing, and tempo adjustment.
Details controls for master volume, headphone output, control room, and signal routing via FireWire/USB.
Steps for safely powering up devices, connecting cables, and setting initial mixer levels.
Guidance on setting output levels, adjusting channel faders, PAN/BAL, and using AUX sends.
Procedure for setting channel gain using SOLO, PFL mode, and VU meters for optimal signal levels.
Steps for adding and customizing effects like reverb, delay, and chorus using channel FX knobs and TAP/SELECT.
Instructions for connecting the mixer to a computer and setting up recording software for audio transfer.
Guide to using the mixer's USB drive for standalone audio recording, including setup and playback.
Details on transport controls, sample rate settings, playlist modes, and error code explanations.
Instructions for setting up the mixer as a MIDI controller for recording software in Standard or Mackie modes.
Detailed technical data for microphone, line, stereo inputs, EQ, and main/control room outputs.
Specifications for FireWire/USB interface, USB recorder, power supply, and physical dimensions.
Information on online product registration, warranty terms, and efficient claim processing.
Guidance on handling malfunctions, checking power voltage, and replacing fuses safely.
Details FCC rules for digital devices, protection against interference, and user modification warnings.
To Next Page