BEKA BEKA-MAX OC-1 - User Manual

1
Multi line pump OC-1
with integrated control unit BEKA-troniX1 (12-24V DC)
FU2174280409GB Subject to alterations!
The BEKA-MAX grease central lubrication pump type OC-1
is electrically driven. It has up to 21 independently form
each other, lubrication outlets, but can also be delivered in
Models with 10, 22 and 34 outlets to which the lubricating
points are directly connected. One pump element is
necessary for each outlet. Five pump elements with
different output rates are on disposal.
This enables adjusting the output rate according to the
demand of each lubricating point.
Having a working pressure of max. 200 bar, this pump
enables the supply of commercial greases up to NLGI-cl.2.
The pump only differs from reservoir and outlet types and is
controlled by the integrated BEKA-troniX1.
Technical data:
Motor:
Operating voltage: 12 V DC / 24 V DC
Speed: 15 r/min.
Current consumption:
No-load operation at + 20°C: 0,8A/ 0,4 A
Full load at + 20°C: 2,2A/ 1,1 A
Fuse: 5A/ 3 A
Integrated control unit
16
1
C
ycle tim
e (h
)
S
ervice
E
A
/ PAC
on
troller
Typ
B
E
K
A
-tron
iX
1
Lu
bricatio
n tim
e (m
in
.)
8
0,5
8
0,5
Pump:
Max. operating pressure: 200 bar
Permit. operating temperature: -28°C to +70°C
Reservoir content:
Reservoir transparent: 1,9 kg, 2,5 kg, 4 kg or 8 kg
Sense of revol. of agitator blade: counter-clockwise
Installation position: Reservoir vertical
Output rate: depending on pump element (see page 6)
Protection class: IP6K9K acc. to DIN 40050
Lubricant: greases up to NLGI-cl. 2
(without solid lubricants)
mineral oils of 40 mm /s (cSt)
2
Control unit: BEKA-troniX1
Supply voltage: 10 to 60 V DC
Current max.: I = 6,0A
Fuse (not included in device): F 6,3 A
(5x20) semi time-lag
Outlet for signal lamp: I = 0,4A
Temperature range: -35°C to +75°C
Multiline pump OC-1 with 2,5 kg reservoir, 21 outlets and
integrated BEKA-troniX1.
...een product van BEKA

BEKA BEKA-MAX OC-1 Specifications

General

Brand	BEKA
Model	BEKA-MAX OC-1
Category	Water Pump
Language	English

Summary

Multi line pump OC-1 Introduction and Technical Data

Technical Data Overview

Details specifications for motor, pump, lubricant, and control unit parameters.

Multi line pump OC-1 Functionality

Pump Operation Principle

Explains the pump's mechanical operation including motor, eccentric, and piston stroke.

Multi line pump OC-1 Dimensional Drawings: 10 and 22 Outlet Models

Dimensions and Installation Data

Provides detailed dimensions and installation information for pump models with 10 and 22 outlets.

Multi line pump OC-1 Dimensional Drawings: 34 Outlet Model

Dimensions and Installation Data

Provides detailed dimensions and installation information for pump models with 34 outlets.

Multi line pump OC-1 Dimensional Drawings: 21 and 34 Outlet Models

Dimensions and Installation Data

Provides detailed dimensions and installation information for pump models with 21 and 34 outlets.

Multi line pump OC-1 Pump Elements

Pump Element Specifications and Ordering

Details on pump element types, output rates, connection options, and ordering information.

Multi line pump OC-1 Pump Element Installation

Installation Procedure for Pump Elements

Step-by-step guide on installing pump elements, including sealing and securing components.

Multi line pump OC-1 BEKA-troniX1 Controller Function

Controller Operation and Indicators

Explains how the BEKA-troniX1 controller operates, including LED indicators and activation sequences.

Multi line pump OC-1 BEKA-troniX1 Operation Methods

Time vs. Revolution Control

Compares time-based and revolution-based control methods for the BEKA-troniX1 controller.

Multi line pump OC-1 BEKA-troniX1 Parameter Adjustment

Adjusting Lubrication and Cycle Times

Details on how to set lubrication and cycle times using the controller's switches and available ranges.

Adjusting Pump Revolutions

Instructions for adjusting pump revolution parameters and available ranges for setting.

Multi line pump OC-1 BEKA-troniX1 Signal Indicators

LED Indicators for Status and Errors

Explains the meaning of red and green LEDs for various operational states like standby, lubrication, and errors.

Multi line pump OC-1 Additional Equipment

Grease Level Monitoring System

Details the optional grease level monitoring system, its components, connection, and activation.

Multi line pump OC-1 Grease Level Monitoring Details

Operation and Retrofitting

Explains how grease level monitoring works, including the proximity switch, fault indication, and retrofitting.

Multi line pump OC-1 Retrofitting Options

Retrofitting the BEKA-troniX1 Controller

Information on retrofitting the BEKA-troniX1 control unit to existing pumps and ordering necessary cables.

Multi line pump OC-1 Wiring Diagram

All Electrical Connections Overview

A detailed wiring diagram illustrating all electrical connections for the pump and its control unit.

Multi line pump OC-1 Pump Filling Procedures

Methods for Filling the Pump

Describes various methods for filling the pump, including using a lubricating nipple, filling coupling, or filling gun.

Multi line pump OC-1 Order Key and Configuration

Selecting Pump and Control Unit Parameters

Guide to using the order key to specify pump voltage, outlet count, reservoir size, and control unit parameters.

Multi line pump OC-1 Control Unit Order Key

Ordering Control Unit Variants

Details on how to order specific BEKA-troniX1 control units, including options for additional equipment and parameters.