BEKA ZEPTO - User Manual

Questions and Answers

K
Keith MoralesAug 11, 2025
What to do if the BEKA ZEPTO supply interrupts but the drive is ok?
- J
  Joann GallegosAug 11, 2025
  If the supply from your BEKA Water Pump interrupts but the drive is working, the issue might be due to wear on the non-return valve in the pump element, a leaky cartridge connection, or low lubricant level. Consider these solutions: * Replace the non-return valve. * Retighten the cartridge, and if necessary, replace the sealing washer or the cartridge. * Insert a new cartridge and ventilate the device to address low lubricant levels.
J
jenniferrandallAug 18, 2025
How to fix a BEKA Water Pump that does not aspire?
- T
  Tom SimmonsAug 19, 2025
  If your BEKA Water Pump does not aspire, it could be due to a low lubricant level or the lubricant not being conveyed properly. To resolve this: * Insert a new cartridge and ventilate the device. * Ensure you are using a lubricant with the correct viscosity.
J
Justin HartAug 27, 2025
What to do if BEKA ZEPTO Water Pump supplies without or with low pressure?
- O
  ohurleyAug 27, 2025
  If your BEKA Water Pump supplies without or with low pressure, it may be due to wear on the non-return valve, heavy wear on the device, or a pressure limiting valve that does not close. To address this, you can: * Replace the non-return valve. * Renew the device if it has heavy wear. * Exchange the pressure limiting valve.
K
kimberly26Sep 3, 2025
Why is my BEKA ZEPTO so noisy?
- C
  Cheryl WintersSep 3, 2025
  If your BEKA Water Pump is excessively noisy, it might be defective. In this case, renew the device.