4.9 General hazard warning – residual risk
All components are designed according to valid regulations for the construction of technical systems with regard to
operational safety and accident prevention. Nevertheless, their use can lead to hazards for the user or third parties as
well as other technical facilities. Therefore, the device may only fulfill its intended purpose in a technically perfect and
faultless condition. This has to happen in adherence to the relevant safety regulations as well as the operating and
assembly manual. Inspect the device and its attachment parts regularly and check them for possible damage or
leakages. Liquids could escape under high pressure from pressurized components which become leaky.
5. Intended use
The device is only approved for the industrial or commercial use.
Only operate the device if it is installed in/at another machine and operated together with it.
Only lubricant may be supplied which complies with the machine manufacturer’s specifications and which is
listed in the lubricant release list FFG_002_ZEPTO (available on request or at www.beka-lube.de).
The device must only be used according to the technical data (see chapter 1. “Technical data”). The values
may never exceed or fall below the values mentioned in the technical data. Never operate the device without
lubricant.
Unauthorized modifications of the device are not permitted. BEKA is not liable for personal injury or damage of machine resulting
thereof.
The intended use also includes:
• paying attention to all chapters and notes in the operating and assembly manual.
• carrying out all maintenance work.
• observing all relevant instructions for work safety and accident prevention during all life cycles of the device.
• having the necessary professional training and authorization of your company to operate the device and to carry out the necessary
work on the device.
Another use or a use beyond this scope is deemed improper.
To Next Page
Loading...
