© BEKA 2019 All rights reserved! -40-
11. Control
The device can be used for various applications due to the integrated control.
The device is available with a simple or a complex control version:
Simple version
Device 10142862
(DEUTSCH plug)
Complex version
Device 10144013
(DEUTSCH plug + bushing M12x1)
Permanent operation
for external control
Operational mode of time-dependent
lubrication duration
Time-dependent lubrication duration
Time-dependent cycle duration
Operational mode of time-dependent
lubrication duration with system
pressure monitoring
Time-dependent lubrication duration
Time-dependent cycle duration
Operational mode of pulse-dependent
lubrication duration
Pulse-dependent lubrication duration
Time-dependent cycle duration
All programs and parameters of the device can be set directly with the control keys on
the display under the inspection glass.
Unscrew the inspection glass for this, make the desired settings and retighten the
inspection glass.
No additional software or tools are needed.
Screw the inspection glass properly back on, otherwise dirt and water can enter the control and can destroy
the device!
The integrated control operates depending on the lubrication cycle.
A lubrication cycle consists of the cycle duration and the lubrication duration (pump operating time) which is included in the cycle
duration. Cycle duration means the period from the beginning of a lubrication to the beginning of the next lubrication.
To Next Page
Loading...
