Need help?Do you have a question about the BEKA HAMAX 2 and is the answer not in the manual?
General| Type | Submersible Pump |
|---|---|
| Material | Cast Iron |
| Frequency | 50 Hz |
| Drive | Electric |
| Voltage | 230 V |
Details risks to persons, environment, and device from not following safety instructions.
Outlines customer responsibilities for safe operation, protection, and adherence to regulations.
Specifies safety protocols for maintenance, inspection, and assembly by qualified personnel.
Warns about inherent risks even with technically perfect and compliant systems.
Guides on positioning, connecting, and ensuring proper assembly of the device with the carrier.
Details the steps for connecting hoses for the M14 version of the device.
Explains the procedure for connecting via flange for the M14 version.
Provides instructions for connecting hoses for the M16 version of the device.
Covers professional layout and connection of lubricant and hydraulic lines.
Instructions for correctly inserting the lubricant cartridge into the device.
Procedure for purging air from the device to ensure proper lubricant delivery.
Explains how to adjust the lubricant delivery rate using the throttle.
Describes how the device is connected, driven, and how lubricant is delivered and regulated.
Visual representation of the hydraulic circuit showing components and connections.
Routine checks and retightening of fittings for optimal device performance.
Step-by-step guide on how to replace the lubricant cartridge.
Instructions for cleaning or replacing the device's filter element.
Procedure for replacing the pressure limiting valve to protect the lubricant circuit.
Steps for removing and installing a new pump element.
Details available grease cartridge types and corresponding adapters.
To Next Page
