© BEKA 2019 All rights reserved! -30-
BAL2576_BEKA_HAMAX_System2_0919DE_EN_FR
1. Technical data
Hydro motor:
Supply: ..................................................................................................................... hydraulic breaker circuit, 870-4641 psi (60-320bar)
Differential pressure operation: ................................................................................................................................. min.435 psi (30 bar)
Max. admissible return pressure: ..................................................................................................................................... 435 psi (30 bar)
Volume flow of the drive medium: ...................................................................................................... 0,21-0,74 gal/min (0,8 to 2,8 l/min)
Preset speed of the eccentric ...................................................................................................................................................... 14 r.p.m.
................................................... (with oil ISO VG 46 at 68°F [20° C] and a volume flow of the drive medium of 0,4 gal/min [1,5 l/min])
Hydraulic oil: ..................................................................................................................................................................... ISO VG 32-100
Temperature range: ............................................................... -4°F up to +158°F (-20°C up to +70°C depending on conveying medium)
Speed: .................................................................................................................................................... adjustable with adjusting throttle
Pump elements:
Delivery rate/stroke PE-120FH: ................................................................................................................................................... 0,12 cm³
Preset no. of strokes: ............................................................................. 14 strokes/min (no. of stroke adjustable with adjusting throttle)
General:
Sound pressure level: ................................................................................................................................................................. <70dB(A)
Weight: ........................................................................................................................................................... max. 7 kg without cartridge
Lubricant reservoir: ...................................................................................................................................................................... cartridge
Compatible cartridges: ................................................................................................................................... type F, FU, J, L, R, Ra or S
Lubricant: .............................................................................. EP greases without solid content or chisel pastes (from NLGI cl. 000 to 2)
The pump HAMAX SYSTEM 2 is subsequently called a device.
2. Lubricants
The following chisel pastes are released for the use in this grease pump:
BEKA Meißelpaste Baier + Köppel GmbH + Co. KG
KAJO Meißelpaste KAJO GmbH
EUROL Meißelpaste EUROL Mineralöl Handelsges. m. b. H.
NILS Meißelpaste Nils Italia S. r. L.
Fuchs Lubritech Meißelpaste Fuchs Lubritech GmbH
BERULUB HTM Paste Carl Bechem GmbH
Anderol Lorax Anderol Italia S. r. L.
Kompressol Meißelpaste Kompressol-Oel Verkaufs GmbH
Motorex Meißeltrennpaste 183 Bucher AG Langenthal
Motorex Schmiertechnik
However, the manufacturer’s guidelines of the carrier device must also be observed.
Caution!
To Next Page
Loading...
Need help?
General
