M10x1
Plug connection Ø6
17
25,2
Plug connection Ø6
16,7
Pipe vonntection Ø6
22
Pipe connection Ø4
21
6
With pipe connection Ø6 with
retaining screw and
olive:
(standard)
Those pump elements can be delivered with five different
connection posibilities.
The pump elements PE-5 respectively 10/15/25/50 can be
delivered in five different output rates per stroke.
PE-5 = 5 mm³ / stroke or revolution
PE-10 = 10 mm³ / stroke or revolution
PE-15 = 15mm³ / stroke or revolution
PE-25 = 25mm³ / stroke or revolution
PE-50 = 50mm³ / stroke or revolution
Order key for pump elements PE-5 to PE-50:
Caution: Pump elements PE-5 resp. 10/15/25/50 have to
be ordered separately.
With threaded connection
M10x1:
With plug connection 90°
for pipe-Ø6:
With straight plug
connection for pipe-Ø6:
With pipe connection Ø4
with retaining screw
and olive:
Description of pump elements PE - 5/10/15/25/50
A maximum of 34 pump elements PE-5 respectively
10/15/25/50, can be installed in the multi line pump OC-1.
Those are directly connected with the lubricating points.
Install the pump in a way, that the length of the separate
pipe lines does not exceed 8 m.
Multi line pump OC-1
Pump elements
Type-no.:
2154 . 9000 . 01
Designation
PE-5
PE-10
PE-15
PE-25
PE-50
output rate / stroke
5 mm³
10 mm³
15 mm³
25 mm³
50 mm³
9001
9002
9003
9000
9010
Connection designation
Threaded connection M10x1
Pipe connection Ø6 with ÜS6 a. DKR6
Plug connection straight for pipe-Ø6
Plug connection 90° for pipe-Ø6
Pipe connection Ø4 with ÜS4 a. DKR4
00
01
02
03
04
Subject to alterations!
Caution: 1 sealing ring per pump element has to be
ordered separately, it is not already installed in the existing
pump!
Cu-sealing ring 14x18x1,5
Order-no.: 090760300611
...een product van BEKA
To Next Page
Loading...
