Why does my Beko WTK62051W Washer directly discharge the water it takes in?
If your Beko Washer is directly discharging the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
Why does my Beko Washer enter standby mode or not take in water?
If your Beko Washer enters standby mode or doesn't take in water after the programme starts, check the following: Ensure the tap is turned on and the water inlet hose isn't bent; flatten the hose if it is. Also, clean the water inlet filter if it's clogged. Make sure the loading door is closed properly. If the water connection is wrong or water is cut off, check the connection and press the Start/Pause key after the water supply resumes.
What to do if the Beko Washer programme cannot be started or selected?
If your Beko Washer programme cannot be started or selected, it may have switched to self-protection mode due to a supply problem such as line voltage or water pressure issues. To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will then be cancelled.
How to start a Beko WTK62051W after closing the door?
If your Beko Washer isn't starting after you close the door, make sure you've pressed the Start / Pause / Cancel button. Also, check if you've overloaded the machine, as this can make it difficult to close the loading door properly. Reduce the amount of laundry and ensure the door is fully closed.
What to do if the loading door of my Beko WTK62051W Washer won't open?
If your Beko Washer's loading door won't open, it could be due to several reasons. The door lock might be activated because of the water level; try running the Pump or Spin programme to drain the water. If the machine is heating water or is in the spinning cycle, wait until the programme completes. If the child lock is engaged, wait a couple of minutes after the programme ends for it to deactivate. Lastly, the door might be stuck due to pressure; try pushing and pulling the door to release it.
Why does my Beko WTK62051W not rinse well?
If your Beko Washer isn't rinsing well, the amount, brand, or storage conditions of the detergent might be inappropriate. Use a detergent suitable for washing machines and your laundry, and store detergents properly. Ensure detergent is placed in the correct compartment. Also, check the pump filter and drain hose for clogs or folds.
Why is there water leaking from the bottom of my Beko washing machine?
If you see water leaking from the bottom of your Beko washing machine, the water drain hose might be clogged or twisted. Clean or flatten the hose. Also, the pump filter might be clogged, so clean the pump filter.
General| Door hinge | Left |
|---|---|
| Water fill | Cold |
| Control type | Buttons, Rotary |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 170 ° |
| Outlet hose length | 1.3 m |
| Appliance placement | Freestanding |
| Feet adjustment | 15 mm |
| Remaining time indication | No |
| Drum capacity | 6 kg |
| Cycle time (max) | 197 min |
| AquaStop function | - |
| Delay start (max) | 9 h |
| Residual moisture | 53 % |
| Spin-drying class | B |
| Maximum spin speed | 1200 RPM |
| Noise level (spin) | 76 dB |
| Noise level (wash) | - dB |
| Number of washing programs | 15 |
| Maximum water flow pressure | 1000 kPa |
| Minimum water flow pressure | 100 kPa |
| Cycle time (quick washing program) | 28 min |
| Current | 13 A |
| Connected load | 1550 W |
| Power plug type | Type G |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 1 W |
| Water consumption per cycle | 43 L |
| Energy consumption washing per cycle | 0.733 kWh |
| Package depth | 465 mm |
| Package width | 650 mm |
| Package height | 880 mm |
| Package weight | 57000 g |
| Washing class | A |
| Paper packaging weight | 10 g |
| Plastic packaging weight | 178 g |
| Harmonized System (HS) code | 84501190 |
| Expanded Polystyrene (EPS) packaging weight | 733 g |
Weight and Dimensions| Depth | 440 mm |
|---|---|
| Width | 600 mm |
| Height | 840 mm |
| Weight | 56000 g |
| Door opening diameter | 300 mm |
Safety precautions to prevent injuries and material damage.
Guidelines for safe use of the appliance by children.
Precautions regarding electrical connections and potential shocks.
Step-by-step instructions for installing the washing machine.
How to use detergents, softeners, and other cleaning agents.
Table detailing wash programmes, duration, and consumption.
Procedure for draining residual water and cleaning the pump filter.
Solutions for issues with starting, selecting, or running programmes.
Troubleshooting for water intake, draining, and leakage problems.
To Next Page
