Belarus 1025 2008 User Manual

Belarus 1025/1025.2/1025.3 Section D. Controls and instrumenmts
D19
Control of rear axle differential
interlock (Belarus 1025/1025.2)
1. Pedal interlock tractors. Press pedal
(1) for short-time interlock switch.
2. Hydraulic interlock tractors
(Belarus 1025.3)
Press key (4) close to panel FDA control
key (2) to control rear axle differential
interlock.
Three-position key (40 has the following
positions;
• «Automatic interlock” —
when upper part of key is pressed (fixed
position);
• Differential interlock is switched off
(DI) middle (fixed) position;
• «Forced interlock» —
with lower part of key pressed.
(not fixed position,(only when the key
is held pressed)
Important! Differential interlock is
automatically switched off when driving
wheels turn by over 13°.
With interlock differential being switched
on, lamp of alarm (3) is switched on and
goes out when ID is automatically off , or
if key (4) is put in the middle position.
Important! The mode “Forced
interlock” should be used only for
short-time over coming of road
obstacles or during field and transport
works.
Warning: Do not use differential
interlock at travel speed of over 10
km/h and during tractor turn. Violation
of these rules hampers tractor
steering
, reduces power control
operation life and tells on movement
safety.

Belarus 1025 2008 Specifications

General

Brand	Belarus
Model	1025 2008
Category	Tractor
Language	English