Belarus 1025/1025.2/1025.3 Section F. Ganging up
F2
Tools for hinging agricultural
machinery to tractors
(power controlled tractors)
Rear three-point mounting mechanism
— is used for coupling mounting and half-
mounting agricultural machinery, like
ploughs, planters, cultivators, sprayers,
and so on.
Traction-coupling mechanism (cross-
piece) TCM-1J — is used for operating
trailed machinery, like potato harvester,
etc.( except one-axle trailers) at speed up
to 15 km/h.
ATTENTION! Never use TCM-1J for
transportation purposes.
Traction-coupling mechanism TCM-2
(hydraulic hook) — is used for
operating one-axle trailers and other
machines (optional).
Traction-coupling mechanism TCM-1M
(pendulum) — is used for operating heavy
trailed machines (optional).
Traction-coupling mechanism of
integrated type (combination of TCM-1M and
TCM-2) (optional).
Traction-coupling mechanism TCM-3V
(towing mechanism with automatic
hinge)— is used for operating two-axle
trailers.
To Next Page
