MIPP
Release
01
01/12
11
1.2.2 SC module
The following module designs are available:
Single module (30 mm width) with SC Duplex adapters for a maximum of
12 fibers
Double module (60 mm width) with SC Duplex adapters for a maximum
of 24 fibers
The SC module consists of the following components:
Fiber bracket
SC Duplex adapters with mirror-image construction
2 permanent installed screws for assembly on the housing
Brilliance connectors or optical fiber pigtails with SC connectors
(depending on order)
Optical fiber splice holder
Fixing for strain relief
Cable gland
M16 with single modules
M20 with double modules
Note: The M16 cable gland of the single module is suitable for cable with
a maximum diameter of 10 mm.
The M20 cable gland of the double module is suitable for cable with a
maximum diameter of 13 mm.
Figure 5: SC single module and SC double module – Components
1 – Cable gland
2 – Fixing screw
3 – LC Duplex adapters
4 – Fixing screw
5 – Fiber guiding "fingers"
6 – Optical fiber splice holder
7 – Fixing for strain relief
2
4
1
3
5
6
1
5
6
4
3
2
7
7
To Next Page
Loading...
