12
Connect to optional speaker/MIC and programming cable.
Basic Operation
Turning the power on /off
Rotate the power switch/volume adjusting keys clockwise to turn the power on.
Rotate the power switch/volume adjusting keys anti-clockwise to turn the
power off.
Adjusting the volume
After the radio is power on, you can rotate the power switch/volume adjust
keys to adjust the volume level, rotate the knob clockwise to increase the
volume, or rotate the knob anti-clockwise to decrease the volume.
Selecting a Channel
Turn the channel selector knob to select channel 1 to 16, rotate the knob
clockwise to increase the channel number, or rotate the knob anti-clockwise to
decrease the channel number.
Note: If a channel is not programmed, LED indicator flash red and a prompt tone " no
channel “sounds..
To Next Page
Loading...