23
Emergency
The digital channel and digital analog compatible channel support the
emergency alarm function. In case of an emergency you can enter emergency
mode to ask for help, short press programmed “Emergency on” key to send
emergency information, to exit emergency mode, long press “Emergency off”.
On regular type alarm, after send emergency information then receive ACK
command or the alarm cycles expire, the radio will exit the emergency mode
automatically. On silent type alarm, after send emergency information the n
press PTT key to exit emergency mode.
Via programmable software to set it: Signaling Systems folder → Digital Red
Alert → add system1 to set parameters → Channel folder → add
Emergency system
● Emergency Type: Disable, Regular, Silent, Silent with voice, the Disable
option is unable to transmit emergency information;
●Emergency Mode: Emergency Alarm, emergency alarm with call, emergency
alarm with voice to follow.
●Revert Channel: Revert channel is used for digital emergency, only the
channel default address is set as group call contact, the channel is available
for revert channel.
●Impolite Retries: If the current channel is busy, press programmed key also
can send emergency information, number of impolite retries can be set as 1to
15.
To Next Page
Loading...