13
Selecting a Zone
The radio supports up to 2 zones, each with a maximum of 16 channels. You
may select a desire zone by setting zone selection function to orange button,
button 1 or button 2, then handover zone. While enable all tone alert, select
zone will hear a channel number. For example: the current works in area 1,
press the zone selection button, the prompt tone sounds "area 2".
Dual Modes Switching
If current channel mode is D/A compatible, press side button【AD Switch】
function to switch the channel mode. The current channel mode is digital
compatible analog , press 【AD Switch】button to switch to analog compatible
digital mode; the current channel mode is analog compatible digital, press
【AD Switch】button to switch to digital compatible analog mode..
Note: AD Switch function only switching the channel mode temporarily, while you restart
the radio or rotate channel selector knob, the current channel will resume to default mode.
Call
Each digital channel may preset a contact, the preset contact could be a
private call contact, a group call contact or an all call contact; on analog
channel press and hold down the PTT key to transmit. On digital compatible
analog channel press PTT key, if is not within hang time to transmit analog call,
within the preset time period to call back; On analog compatible digital channel
To Next Page
Loading...
