17
effective.
●Nuisance Delete: While scanning on, If you don’t want to receive activities on
the channel, press the programmed Nuisance Delete key to remove the
channel from the scan list temporarily. When restart scanning, the nuisance
channel will return to scan list.
●Permanent Monitor: Permanent monitor feature is the same as monitor, but
permanent monitor feature only can be set as long press key. And you should
long press the programmed Permanent Monitor key to exit this feature.
Functions and Operations
Scan
Scan is useful for monitoring signals on the radio channels, the channels
include in the scan list. While scanning, the radio checks for a signal on each
channel and only stops on a channel if a signal is present. Press programmed
Scan on/off key to begin scanning, while scanning on, a “scan on” sounds,
LED indicator flash red. While scanning off, a “scan off” sounds
Via programmable software to set it: Scan folder( Scan hang time) → A
desired scan list → add available channel to members channel → a digital or
analog channel to select scan list
● Scan Hang Time : When a signal is detected on a channel, scan pauses on
that channel, the radio will remain on the busy channel until the signal is no
To Next Page
Loading...
