16
●
Scan on/off: Allow user to enable or disable the scan function.
● All alert tone on/off: Allow user to enable or disable all alert tones.
●Battery Indication：It’s convenient to know battery capacity. If battery strength
level is 70%-100%, a “Power High “sounds; if battery strength level is
30%-70%, a “Power Middle” sounds; if battery strength level is 15%-30%, a”
Power Low “sound.
Note: If the battery gets lower, a “Please Charger” tone will sound, at the time press
programmed” Battery Indicator” key, you can’t hear battery capacity indication sound.
●Zone Toggle: Allow user to change zones, if the radio contains 2 zones,
press programmed button will be a zone number sounds. If the radio only add
a zone, this feature is useless.
●AD Switch :To temporarily switch channel mode to AD or DA on digital
analog compatible channel
●High/Low Power: User can switch the Tx power level between high and low
power by pressing the programmed High/Lower Power key.
●Repeater/talk around：Allow radio set to connect through repeater or achieve
standalone communication in talk around mode.
●
Vox on/off: If set vox level as 1 to 9 via programming software, press the
programmed VOX on/off key to enable or disable the VOX feature. Press to
activate the VOX feature a VOX on sounds; disable the VOX feature a VOX off
sounds.
Note: Plug the dedicated earpiece into the accessory jack of the radio, the VOX feature is
To Next Page
Loading...
