V4. 12. 2010
.
Subject to modification
3
Contents
The actuators listed in this catalogue are intended for the
operation of air dampers in HVAC systems.
The Damper Actuator is not allowed to be used outside the
specified field of application, especially in aircraft.
The enclosure of the actuator equipment may only be
opened by the manufacturer. It contains no components
which the user can replace or repair.
The device contains electrical and electronic
components and is not allowed to be disposed of as
household refuse. All locally valid regulations and
requirements must be observed.
When calculating the torque required to operate
dampers, it is essential to take into account all the data
supplied by the damper manufacturer concerning cross
sectional area, design, mounting and air flow condition.
Note:
LMU24(-S/-F/-T)
LMU24-SR
LMU230(-S/-F)
LMU230SR
NMU24(-S/-F/-T)
NMU24-SR
NMU230(-S/-F)
NMU230SR
SMU24(-S/-F/-T)
SMU24-SR
SMU230(-S/-F)
SMU230SR
GMU24
GMU24-SR
GMU230
Wiring diagrams
Auxiliary switch adjustment
Mechanical accessories
Replacement table (for Mechanical Fail-Safe Damper Actuators)
General Damper Actuator, 40Nm
LMQU24
LMQU24-SR
Fast Running Damper Actuator, 4Nm
NMQU24
NMQU24-SR
Fast Running Damper Actuator, 8Nm
SMQU24
SMQU24-SR
Fast Running Damper Actuator, 16Nm
General Damper Actuator, 20Nm
General Damper Actuator, 10Nm
General Damper Actuator, 5Nm
Product overview
CMU24(-F8/-F10)(-T)
CMU24-SR-R
CMU230(-F8/-F10)
CMU230(-F8/-F10)-RES
General Damper Actuator, 2Nm
Electrical accessories
Mechanical Fail-Safe Damper Actuator, 2Nm
Mechanical Fail-Safe Damper Actuator, 4Nm
Mechanical Fail-Safe Damper Actuator, 10Nm
TF24(-S)
TF24-3
TF24-SR
TF230(-S)
LF24(-S)
LF24-3
LF24-SR
LF230(-S)
NFU
NFU-S2
NFU24-SR
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
56
Mounting instructions
46
61
63
65
25
26
27
28
29
30
4
6
7
8
9
62
31
32
33
34
TF230-SR 35
36
37
38
39
40
41
42
Mechanical Fail-Safe Damper Actuator, 20Nm
SFU
SFU-S2
SFU24-SR
43
44
45
•
•
•
•
•
Using Belimo Damper Actuators:
Torque requirements: