Need help?Do you have a question about the Belimo CMU Series and is the answer not in the manual?
General| Wiring | Screw terminals |
|---|---|
| Housing Material | Plastic |
| Supply Voltage | 24 VAC/DC |
| Communication Protocol | Modbus RTU, BACnet MS/TP |
| Control Signal | 0-10 VDC, 2-10 VDC |
| Operating Temperature | -40°F to 140°F [-30°C to 50°C] |
| Storage Temperature | -40°C to 80°C (-40°F to 176°F) |
| Relative Humidity | 5% to 95% non-condensing |
Overview of mechanical fail-safe actuators by torque.
Detailed technical specifications for CMU24 actuators.
Physical dimensions and diagrams for CMU24 actuators.
Technical specifications for CMU24-SR-R actuators.
Physical dimensions and diagrams for CMU24-SR-R actuators.
Technical specifications for CMU230 actuators.
Physical dimensions and diagrams for CMU230 actuators.
Technical specifications for CMU230-RES actuators.
Physical dimensions and diagrams for CMU230-RES actuators.
Technical specifications for LMU24 actuators.
Physical dimensions and diagrams for LMU24 actuators.
Technical specifications for LMU24-SR actuators.
Physical dimensions and diagrams for LMU24-SR actuators.
Technical specifications for LMU230 actuators.
Physical dimensions and diagrams for LMU230 actuators.
Technical specifications for LMU230SR actuators.
Physical dimensions and diagrams for LMU230SR actuators.
Technical specifications for NMU24 actuators.
Technical specifications and physical dimensions for TF actuators.
Technical specifications and physical dimensions for LF actuators.
Technical specifications and physical dimensions for NFU actuators.
Technical specifications and physical dimensions for SFU actuators.
To Next Page
