17
The unit should be placed on a stable, smooth surface (use the packaging).
Place the hob in a work surface cut out. Secure by screwing four brackets on the bottom of the hob
(see picture) after installation.
Locate the 4 screw holes (C) on the base of the appliance (D). Attach the 4 retaining brackets (B) to the
base of the appliance (D) using the 4 screws (A), after connecting the connection cable and placing the
appliance into the worktop cut out.
A B C D
Screw Bracket Screw hole Base
To Next Page
Loading...
