Belling BRD900DF - Using the Dual Wok

USING YOUR APPLIANCE
90cm Gas-Through-Glass
Cook Zones Minimum Pan Sizes (mm) Maximum Pan Sizes (mm)
Wok
100
300
All other cook zones 220
110cm Gas-Through-Glass
Cook Zones Minimum Pan Sizes (mm) Maximum Pan Sizes (mm)
Wok
100
280
All other cook zones 220
Warning: Do not allow cooking vessels to overlap cooking zones
Note: GTG - Ensure when locating the GTG pan supports, they securely locate onto the pins on the
hotplate
Using the Dual Wok
90cm Wok 110cm Wok
OFF
OFF
To ignite the outer burner of the wok, turn the control knob to the ignition and ame symbol (1). Hold for
15 seconds until the ame takes hold. Then turn the control knob to the desired power.
To activate the outer and inner wok rings together, turn the control knob to the dual ame symbol (2). To
reduce the power of both wok rings, turn the control knob to (3).
Please note, it may be necessary to apply increased pressure when pressing in the control knob when
lighting the wok burners. This is to ensure operation of the safety system for these burners.
3
2
2
1
1
3