INSTALLATION INSTRUCTIONS - INDUCTION
Installation above an oven
Refer to the manufacturer’s instructions for
clearances above the oven.
We recommend a 20mm gap between the
bottom of the hob and appliance.
In the case of a pyrolytic oven
If installing the hob above a pyrolytic
oven, additional provision for air
circulation / ventilation may be required.
Due to the excessive temperatures attained
during pyrolysis, using the hob at the
same time may cause the thermal safety
device within the hob to operate.
Wooden Dividing panel required if
being fitted above a drawer
To Next Page
Loading...
